Show Sidebar
What is a Ball Valve?

A ball valve is fairly a ball placed in a passageway by method of which fluid flows. The ball has a hole which opens and closes the valve. When the ball is positioned to ensure that the hole runs precisely same path as the passageway, the fluid basically flows by method of the hole, and also the valve is open. Nonetheless, when the ball is placed to ensure that the hole is perpendicular to the passage, the fluid are unable to pass as an outcome of, as well as the valve is closed. The ball is controlled from outside the valve, commonly has the ability to turned ninety degrees, or a quarter flip, backward and forward to close the valve and open.

About Butterfly Valves

A butterfly valve amounts a ball valve except that the ball-shaped system within is replaced by a disc or plate that rotates on a rod or trunnion. Not like the ball valve, which provides a perpendicular encounter to the flow, the butterfly valve can be placed both perpendicular to parallel to the circulation. This development makes it possible for movement management (described throttling) that the ball valve isn't really prepared to achieve. Considered that the disc normally exists within the circulation, a butterfly valve triggers a pressure drop, irregardless of its state.

Ranges of Butterfly Valves

The wafer style butterfly valve is a relatively affordable and regular advancement that's made to avoid backflow in unidirectional movement techniques by maintaining a seal against strain in potentially course. This is achieved as an outcome of with securely fitting seals this type of as gaskets, o-rings, or accuracy machined seals. Lug-type butterfly valves are reduced tension rating valves using threaded inserts on the two sides of the valve entire body. They're installed involving 2 flanges, makings it possible for a single side of the motion program to be disconnected not having disturbing the opposite.

The Triple Offset Torque Seated (TOTS) butterfly valve is one specific where the offset design does not enable the metal seal to arrive into get hold of with the metal seat other than at total closure.

Butterfly Valve Uses

Butterfly valves are employed for a great deal of of the identical purposes as ball valves, but considered that they provide a terrific procedure of deal with, they have the ability to be utilized on bigger lines, this sort of as firefighting device, front and rear suction ports and tank-to-pump lines.

The valve is kept in location by using studs or bolts and nuts from flange to flange. This type of setup, obviously, makes it impossible to detach just one side of the piping technique from the valve. That is where the lug design valve comes in.

Carry Style Butterfly Valves Lug style valves have actually threaded inserts at both sides of the valve body. This allows them to be set up into a system making use of 2 sets of bolts and NO nuts. The valve is installed between two flanges making use of a separate set of bolts for every single flange. This setup allows either side of the piping system to be detached without interrupting the opposite.

A lug design butterfly valve made use of in stumbling block service typically has a lowered pressure score. For example a lug design butterfly valve mounted in between 2 flanges has a 150 psi pressure score. The very same valve mounted with 1 flange, in stumbling block service, has a 75 psi rating.

The Green Book leading industrial, commercial, and consumer directory in Singapore offers various Butterfly Valves coming from different Companies and Suppliers.

Platinum Listings

Select Products Below & Click Enquire Now or Add To My Selection or View My Selection

Butterfly Valves

We offer below Butterfly Valve types:- Resilient Seated - Double Offset High Performance - Triple Offset Metal Seated - Actuated Butterfly Valve - Control Butterfly

1 Matching Products | View All Products
realtec-pte-ltd
10 Admiralty St #03-88/89 North Link Bldg S(757695)

Realtec Pte Ltd

Realtec Pte Ltd principally provides services / products to Engineering & Procurement Contractor, System Integrator & End User in the Oil & Gas, Petrochemical, Pharmaceutical, Refinery, Offshore, Marine and Power Generation ...

Gold Listings

Dickson Hardware & Engineering Pte Ltd

Blk 2021 Bt Batok St 23 #03-192 S(659526)

Dickson Hardware & Engrg Pte Ltd is the manufacturers and suppliers that offer the best solution and business consultation for over 30 ...

Basic Listings

Burkert Singapore Pte Ltd

12 Tai Seng Link #07-01/02 S(534233)

Burkert Contromatic Singapore Pte Ltd is a subsidiary and S.E.A regional center of Burkert Group Welcome to the world of Bürkert ...

Liquimech Engineering Pte Ltd

51 Bt Batok Cres #06-42 Unity Centre S(658077)

Liquimech Engineering Pte Ltd was established in the year 2005. Our company provides comprehensive range of Centrifugal and Positive ...

Val-Technik Pte Ltd

40 Ubi Crescent #01-05 Ubi Techpark S(408567)

Towards A High Service Standard Since 1988, Val-Technik has supported Asia’s regional industries with best-in-class valves, metering ...

William Eng Pte Ltd

15 Changi Nth St 1 #01-02 I-Lofts@Changi S(498765)

William Eng Pte Ltd was established in 1988, providing excellent turn-key services to various industries including offshore oil and gas ...

Achech Valve Singapore Pte Ltd

14 Kwong Min Rd S(628715)

Achech Valve Singapore Pte. Ltd. was established in 1996, and was a representative for European; Japanese & USA valves manufacturers at ...

ACR Engineering (S) Pte Ltd

5004 Ang Mo Kio Ave 5 #02-09 Techplace II S(569872)

AHF Industries

2 Kallang Pudding Rd #06-05 & #07-12 Mactech Bldg S(349307)

AHF Industries was founded in the year 1987. Our company is well recognized as an established agent, commercial supplier and distributor of ...

<<
Advertisements