Product Description

- Reduces slips and falls in the work place - Outlasts and outperforms sand and paint - The strongest, most aggressive anti-slip products available- Resists harsh chemicals such as gasoline, oil, acids, alkalis, and aliphatic solvents - Tough enough to handle heavy fork lift and vehicular traffic - Contaminants are trapped in the valleys and traction is maintained at the peaks Loctite Bigfoot Anti-slip can be applied in 3 easy steps! 1) Surface Preparations - The surface should be cleaned using Loctite Natural Blue or any other suitable cleaners. Remove any external particles if neccesary using a mechanical method. Abrade the surface as much as possible. 2) Mixing - Thoroughly mix contents of can with a mechanical mixer using a Jiffy mixer, product No. 96131 3) Priming - Use primer sealant Part No. 40142 on tile, concrete, etc surface and metal primer Part No. 96132 on metal surface. Mix resin and hardener accordingly to recommended ratio and let dry until primer become 'tacky'. 4) Application - Pour a 'ribbon' of material on the surface approximately 60cm x 15cm. Using a phenolic roller Part No. 96121, roll material towards you with a moderate amount of pressure. Do not over-roll too many times or press down too heavily.