+ Submit your article here

How to Take Care of Castor and Wheels

5/20/2015 4:56:26 PM | by Autumn Gomez

Castors & Wheels

Castor and wheels are wheels that are created to be mounted at the bottom of small or large objects to enable it to move easily. Casters and wheels are also referred to as castor or caster. Casters are available in different sizes and are often made of plastic, rubber, aluminium, nylon or stainless steel. These wheels are utilized in extensive applications such as office chairs, material handling equipment, shopping carts and many more. High capacity and heavy duty casters are used in various industrial applications including carts, platform trucks, tow lines in plants and assemblies. Typically, castors work better on flat and smooth surfaces.

Castors are made to endure frequent wear and tear specifically the ones manufactured by experienced companies. Each castor and wheel undertakes post production testing to make sure that this is high quality and durable.

Generally, castors live longer than the equipment it is mounted upon. However, some castors are neglected and handles immense burden which reduces its life span.

Such poor management may be due to the fact that many people fail to notice their significance. People do not realize that once the castor wheel becomes inefficient the entire equipment will fall apart in a matter of time, unless the following guidelines are taken into account.

Worn out castor wheels should be replaced

Often times, castor wheels come in fours or three, to say the least. When one has equipment that is four-wheeled and one of the wheels begun to malfunction, people still move the equipment around until all of the caster wheels become futile. As a consequence, the three castor wheels that should have been saved if the user replaced the single damaged castor will completely be destroyed.

To keep away from this, a caster should be replaced when it starts to malfunction. In other words, it would be better to replace one malfunctioning caster wheel the sooner than replace all four of them in a short period of time, or worse, requiring new equipment.

Proper Lubrication

Lubrication is required on the axle of a castor wheel regularly for it to function properly. Properly lubricated shaft reduces the friction between it and the inner part of the wheel thus; the workload of the castor wheel is significantly lessened. Lubricating castor wheels will provide the user ease of moving the equipment around.

Take note of the type of lubricant to be used in the casters wheels. Various circumstances need different kinds of lubricants for optimal performance. The working condition may determine whether to use wet lubricant or a dry lubricant. For a dry and dusty environment, dry lubricant is suggested since dust settles less than using a wet lubricant. On the contrary, wet lubricants are used on wet environments as it is not easily washed away in comparison to the dry type.

Check for Cuts and Punctures

The smallest cuts, punctures and scratches that are neglected will damage the whole caster eventually. The most common objects that may puncture the wheel casters are tacks, nails, wooden splinters, cutting tools, glass and poor floor conditions.

Functional moving equipment is only as great as the castor and wheels attached to it. Mobile equipment cannot deliver its role if it cannot be brought to the desired location. Therefore, taking good care of its castor wheels is a must!

Are you sourcing for a product or service?

Do you need a quotation?