+ Submit your article here

Understanding the Process and Benefits of the Hot Stamping Service

8/28/2015 9:13:00 AM | by Reine S

Hot Stamping Service

Hot Stamping Service revolves in the utilization of punches and dies in order to produce three-dimensional outputs. This service is also used to provide various definitions to surfaces; examples of these are letterings and flat sheets. The hot stamping process may be applied not limited to ferrous and non-ferrous materials but to thermoplastics and alloys as well.

 

Hot stamping is one of the major variations of stamping services; it is a dry printing technique of lithography wherein foils or predried ink are being transferred into a particular surface at high levels of temperature. Heating is a significant part of the hot stamping process as it enables image transfer. With the help of a stamping die, the engraved image is heated before it is transferred to a marking foil. A marking foil is responsible for leaving the ink on a particular surface where the image is going to be transferred. The dye stamping process on its own is non-polluting since the materials used are dry.

 

Dies and foils are the most commonly used tools in the hot stamp process. Dies are typically made of silicone rubber or metal, and may possibly be cast or shaped directly. These dies are capable of carrying high qualities of detail to be transferred into a surface; they may be shaped to adapt some irregularities in the surface. Foils, metallic and non-metallic are multi-layered coatings which transfer to a particular surface of the product. Different hot stamping machines are utilized to serve a variety of purposes, but the most commonly known hot stamping machine is the simple up-and-down press.

 

Benefits of Hot Stamping Services

 

When hot stamping is compared to another stamping service, it is highly favored due to its numerous advantages. This process has flexibility that can be used in an extensive range of materials even plastics. Products including stamping wire solutions, pencils and paper are only few of the outputs of hot stamping technique. It is a common technique broadly used in security printing, marking plastics and became an infamous way of embossing or gold tooling in book printings.

 

In addition, the process is important since it is a dry method. There will be no complications on learning about demanding procedures such as mixing inks just to get the desired output from the procedure. The hot stamp machine can be managed manually without complicated interventions required.

 

What the operator actually has to do is attach the die to the plate; then, a fraction of the fixture should be popped out. This makes the procedure more permanent and the output to adapt even to harshest of conditions. Utilizing a metal die in the procedure will enable for branding, which means even if the color fades out, the brand name will still remain on the plastic.

 

Hot stamping can produce an extensive array of images from various materials. Metal dies form brass, magnesium, copper or hardened steel is the most common. Comparing all four materials for metal dies, magnesium is the most cost-efficient but also the poorest with regards to durability. Hardened steel is the most costly but is highly favored due to its outstanding durability. Alternatively, silicone rubber dies are subcategorized according to hardness and are simply advantageous with images which are not flat.

Are you sourcing for a product or service?

Do you need a quotation?